Designed for Honda 2 HP Outboard Motors - No Drilling Required Stabilizer - Compatible with BF2D and BF2DH

・Designed specifically for Honda 2 HP outboard motors. No drilling required stabilizer. Compatible with both BF2D and BF2DH models.

・Compatible with older models (BZBF)
・Compatible with current models (BAAC)

Size:
210×260×29 (slight error may occur)

*Material used is SUS304 1.5mm.
We also tested a 2mm version, but the effect was the same as the 1.5mm version. Considering cost-effectiveness, we are producing it with 1.5mm to offer it at a lower price.

*We have used this product for over 3 years without any detachment or deformation, so you can use it with confidence. (We have not placed the stabilizer on the floor while attached.)

This product is designed specifically for the HONDA 2 HP BF2 outboard motor, allowing for easy installation without drilling holes in the main unit.

[1] Remove the anode metal.
[2] Sandwich the main unit between the anode metal and the stabilizer, and loosely tighten with screws. On the other side, sandwich the main unit between the included bracket and the stabilizer and tighten. (The included bracket has screw holes, so no nuts are required.)
[3] Fully tighten the screws to complete.
(Refer to the photos)
Be careful not to overtighten the screws on the bracket side.

[Benefits of attaching the stabilizer]
・Improved thrust
・Improved handling performance
・Improved fuel efficiency with almost no loss of top speed
・Reduced time to plane
・Improved straight-line stability
・Significantly reduces water spray from the propeller onto the lower part of the outboard motor during operation.
・Significantly reduces seawater splash onto the engine.

・Material: SUS304 (Stainless Steel) 1.5mm
Press forming, bending processing

・Resistant to rust, and sufficient strength is achieved with 1.5mm due to bending processing.

・There may be oil marks or scratches from the manufacturing process.
Please refer to the photos.

・
[Notes]
・As this is an original product, there is no warranty.
・Please refrain from purchasing if you are sensitive to details or concerned about minor imperfections.
・We are not responsible for any issues whatsoever.
・We await your purchase only if you understand the above points.